Inta Intamix 15mm TMV2 & TMV3 Thermostatic Mixing Valve

£27.30 £22.75
In stock
SKU
40015CP
  • Buy 5 for £26.40 £22.00 each and save 3%
  • Buy 10 for £25.80 £21.50 each and save 5%

The Intatec 15mm thermostatic mixing valve from Inta is designed primarily for single outlet use, ie. one valve per tap (or other outlet). This reduces the risk of legionella and provides a measure of redundancy. If a single thermostatic mixing valve is used for multiple outlets and it fails then all the taps will cease to function until the issue is resolved.

The 15mm TMV3 thermostatic mixing valve is primarily used for taps, bidets and low water flow showers. In the case of use with showers please inspect your plumbing to be certain the 15mm TMV3 is the required size for your application.

The Intatec 15mm thermostatic mixing valve from Inta is designed primarily for single outlet use, ie. one valve per tap (or other outlet). This reduces the risk of legionella and provides a measure of redundancy. If a single thermostatic mixing valve is used for multiple outlets and it fails then all the taps will cease to function until the issue is resolved.

The 15mm TMV3 thermostatic mixing valve is primarily used for taps, bidets and low water flow showers. In the case of use with showers please inspect your plumbing to be certain the 15mm TMV3 is the required size for your application.

Designed to blend hot and cold water input feeds into a single warm water output thermostatic mixing valves are used to prevent users of the washroom or facilities from scalding themselves. In certain commercial washrooms environments TMV3 valves are mandatory. Particularly where a duty of care is owed to the most vulnerable of users. 

Thermostatic mixing valves deliver safe, blended hot water to taps, showers, bidets and other water outlets, making it ideal for use in hospitals, schools and leisure centres.

Intamix has been specifically designed and manufactured to meet the general requirements of:

  • National Health Service Model Engineering Specification - Thermostatic Mixing Valves - Heath Premises - D08 and BS 7942: 2000 Thermostatic Mixing Valve for use in care establishments (TMV3)
  • BS EN 1111 : 1999 Sanitary tapware. Thermostatic Mixing Valves (PN10) General technical specification & BS EN 1287: 1999 Sanitary tapware. Low Pressure Thermostatic Mixing Valves General technical specification (TMV2)

The Intamix has been independently tested and approved by the TMV3 scheme as a type 3 valve under the requirements of the NHS MES - D08 and approved by Buildcert as meeting the requirements of the TMV2 scheme

The element that controls the temperature of the mixed water discharging from the valve works proportionally on both hot and cold water supplies in order to maintain the temperature of the mixed water discharged.

  • One valve to suit all applications
  • One Piece Cartridge Construction for ease of maintenance and replacement
  • High flow rates with Low Pressure drops
  • 15mm & 22mm versions available
  • TMV3 approved – Complies with NHS Estate D08 & BS7942: 2000
  • TMV2 approved – Complies with BSEN1111 & BSEN1287: 1999
  • Building Regulations Part G compliant
  • Robust and Reliable
  • Easy installation
  • Integral Check Valves and Strainers
  • Available with isolation ball valves and test ports
  • WRAS Approved
  • Integral Check Valves and Strainers
  • Highly resistant to scaling
  • Anti tamper proof head
Write Your Own Review
You're reviewing:Inta Intamix 15mm TMV2 & TMV3 Thermostatic Mixing Valve